Cisco 12416 Installation And Configuration Manual page 395

Appendix A Technical Specifications
Table A-2 AC Electrical Specifications
Description
Power
Standard subsystem (3 power
•
supplies—original series)
Optional subsystem (4 power
•
supplies—original series)
Standard subsystem (3 power
•
supplies—enhanced series)
Optional subsystem (4 power
•
supplies—enhanced series)
1
Rated input voltage
Rated input line frequency
1
Input current rating
Source AC service requirement
1. For each power supply module (three in the standard shelf; four in the optional shelf).
Caution
Table A-3 DC Electrical Specifications
Description
Power
1
Rated input voltage
OL-11495-01
Value
4000 W maximum (for 3 AC-input power supplies—N+1
redundancy)
4000 W maximum (for 4 AC-input power supplies—N+2
redundancy)
4800 W maximum (for 3 AC-input power supplies—N+1
redundancy)
4800 W maximum (for 4 AC-input power supplies—N+2
redundancy)
200 to 240 VAC nominal (range: 180 to 264 VAC)
1
50 to 60 Hz nominal (range: 47 to 63 Hz)
13 A maximum @ 200 to 240 VRMS
1
20 A North America; 16 A international
To ensure that the chassis configuration complies with the required power
budgets, use the on-line power calculator. Failure to properly verify the
configuration may result in an unpredictable state if one of the power units fails.
Contact your local sales representative for assistance.
Value
4800 W maximum
–48 VDC nominal in North America
–60 VDC nominal in the European Community
(range: –40.5 to –72 VDC (–75 VDC FOR 5mS))
–40 VDC to –72 VDC steady-state input voltage
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
Router Specifications
A-3