Cleaning or Replacing the Chassis Air Filter
Step 3
Caution
Step 4
Figure 7-12 Installing the Chassis Air Filter
Air filter
Air filter door
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
7-20
Visually check the condition of the air filter to determine whether to clean it or
install a new replacement.
Dirty—You can vacuum or replace the filter.
•
Do not vacuum the air filter while it is installed in the chassis. You must remove
the air filter completely before you clean it to prevent contaminants from being
drawn into the bays or cage.
Worn or torn—If the filter appears worn or torn, dispose of it in a responsible
•
manner and install a replacement air filter (ACS-GSR16-FLTR=).
Position the metal braces on the back of the air filter to face toward the switch
fabric and alarm card cage. Slide the new or cleaned air filter into the air filter
door
(Figure
7-12).
Chapter 7
Maintaining the Router
OL-11495-01