Route Switch Processor (Rsp) Card Overview; Figure 1-11 Asr 9006 Router Slot Id Numbering - Cisco ASR 9000 series Reference Manual

Route Switch Processor (RSP) Card Overview

Figure 1-11
Power shelf
Power modules
Route Switch Processor (RSP) Card Overview
The Route Switch Processor (RSP) card is the main control and switch fabric element in the
Cisco ASR 9000 Series chassis. There can be two RSP cards in the system. One is the active control RSP
and the other is the standby control RSP.
RSP Cards Front Panel and Access Ports
System alarms reside on the RSP. Alarms will consist of visual indicators with three levels, Critical (red),
Major (red), and Minor (yellow). There is a console interface for remote viewing of alarms and fault
information. The RSP has the following information and alarm LEDs and connectors:
•
•
•
•
•
•
•
Figure 1-12
Cisco ASR 9000 Aggregation Services Router Overview and Reference Guide
1-12
D R A F T — C I S C O C O N F I D E N T I A L
ASR 9006 Router Slot ID Numbering
Fan trays
FT0
Line cards
RSP cards
M0
One external Compact Flash type I/II
Two EIA/TIA-232 RJ232 serial RJ-45 ports: one each for Console and Auxiliary modem ports, with
Manufacturing Test connections to the backplane
Two triple speed 10/100/1000Mbit Ethernet Management ports.
One 4 character 5x7 LED dot matrix display and discrete status LEDs
Alarm Cut Off/Lamp test momentary push button switch
Two RJ-45 Sync timing ports with Link and Fault LEDs built into the RJ-45
Alarm Output DB9 port with 3 alarm outputs
shows the front panel of the RSP card.
FT1
Slot 5 Line card 3
Slot 4 Line card 2
Slot 3 Line card 1
Slot 2 Line card 0
Slot 1 RSP1
Slot 0 RSP0
M1 M2
Chapter 1 Overview and Physical Description
OL-17501-01