Cisco 12416 Installation And Configuration Manual page 377

Chapter 7 Maintaining the Router
Remove the card:
Step 2
a.
b.
Figure 7-52 Removing a Card from the Switch Fabric Card Cage
Air filter door
Step 3 To install the card, reverse the procedure in Step 2.
Close the air filter door and tighten the captive screws.
Step 4
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
OL-11495-01
Pivot the ejector levers to unseat the card from the backplane connector.
Grasp the card by its metal card carrier and slide the card out of the slot
(Figure 7-52).
Place the card directly into an antistatic bag or other ESD-preventive
–
container.
Switch fabric card
Removing and Replacing Cards from the Chassis
7-85