Installing The Chassis Into The Rack - Cisco 12416 Installation And Configuration Manual

Rack-Mounting the Router Chassis

Installing the Chassis into the Rack

Step 1
Warning
Figure 3-8 Raising the Chassis to the Installation Height
Front of chassis
Scissor-jack
screw
Counter-clockwise
expands platform
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
3-16
Use the following procedure to install the chassis in the rack.
Rotate the scissor-jack screw counterclockwise slowly and expand the
scissor-jack platform to raise the chassis to the required installation height
(Figure 3-8).
A second person should be holding the chassis to prevent it from tipping while
the platform is raised.
Chassis anchor
clip and bolt
(2 on each side)
Clockwise
closes platform
Chapter 3 Installing the Router
Scissor-jack
platform
OL-11495-01