Connecting Power To The Dc-Input Power Shelf - Cisco 12416 Installation And Configuration Manual

Connecting Power to the Power Shelf
Step 1
Step 2

Connecting Power to the DC-Input Power Shelf

Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
3-42
Connect each AC power cord to the back panel of the power shelf and secure them
in place with their retention clips
Figure 3-22 Connecting AC Power Cords
Power cord
retention clip
Plug each power supply cable into its AC outlet.
This section contains the procedures to connect the DC source power cables to a
DC-powered router.
The color coding of source DC power cable leads depends on the color coding of
the site DC power source.
Chapter 3
(Figure 3-22).
Installing the Router
OL-11495-01