Line Module For The Alarm/Status Monitor Card; Table 3-5 Lm-Asm Face Plate Connectors - Cisco BPX 8620 Installation And Configuration Manual

Chapter 3 BPX Switch Common Core Components

Line Module for the Alarm/Status Monitor Card

The Line Module for the Alarm/Status Monitor Card (LM-ASM) is a back card to the ASM card. It
provides a simple connector panel for interfacing to your alarm system. It is not required for system and
ASM operation.
The LM-ASM back card must be installed in back slot number 15.
Figure 3-6 illustrates the face plate of the LM-ASM which contains a single subminiature connector
(see Table 3-5). The Alarm Relay connector provides dry-closure (no voltage) relay contact outputs.
Table 3-5
Number
1
Release 9.3.30, Part Number 78-12907-01 Rev. E0, May 2005
LM-ASM Face Plate Connectors
Connector/Indicator Function
ALARM RELAYS A DB15 connector for alarm relay outputs. For more information
about the pinouts, see Chapter 31, "BPX Switch Cabling
Summary."
Cisco BPX 8600 Series Installation and Configuration
Alarm/Status Monitor Card
3-13