Cisco 12416 Installation And Configuration Manual page 137

Chapter 3 Installing the Router
Insert the chassis into the rack until the chassis rack-mounting flanges are flush
Step 4
against the mounting flanges on the rack (or the optional center-mount brackets,
if installed).
•
Note
Step 5 Secure the chassis to the rack beginning
a.
b.
c.
Repeat
Step 6
Tighten all mounting screws (five on each side of the chassis) securely.
Step 7
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
OL-11495-01
The weight of the chassis is now supported by the rack-mounting platform.
Remove the scissor-jack platform and set it safely aside.
Save and reassemble all parts of the shipping package in case it becomes
necessary to transport the router to another location or return it to Cisco.
Do not discard or destroy any of the shipping materials.
Identify one of the holes in group A that aligns with a mounting hole on the
mounting flanges of the rack.
Hold the chassis in position against the mounting flanges on the rack and have
a second person insert and loosely tighten one of the mounting screws
provided.
Repeat step b. for the mounting hole on the other side of the chassis.
Step 5 for each group of chassis mounting holes (groups b through e).
Rack-Mounting the Router Chassis
(Figure 3-11):
3-19