Removing and Replacing the Standard AC-Input Power Shelf
Step 8
Figure 7-30 Reconnecting AC Power Cords
Step 9
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
7-50
Reconnect each of the AC power cords to the back panel of the power shelf and
secure them in place with their retention clips
Power cord
retention clip
Reinstall the power supplies as described in
Power Supply" section on page
Chapter 7
(Figure
"Removing and Replacing an AC
7-33.
Maintaining the Router
7-30).
OL-11495-01