Cisco 12416 Installation And Configuration Manual page 128

Rack-Mounting the Router Chassis
Determine the location in which you want to position the chassis in the rack, and
Step 1
mark holes at the same height on both the left and right rack rails.
Identify the orientation of the left and right center-mount brackets
Step 2
Figure 3-4
Threaded holes
Install the right center-mount bracket
Step 3
a.
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
3-10
Center-Mount Brackets
to chassis
Left bracket
Align the bottom screw hole of the bracket with the marked screw hole at the
bottom of the rack and finger tighten a screw in that hole.
Open holes
to rack
Right bracket
(Figure 3-5).
Chapter 3 Installing the Router
(Figure 3-4).
OL-11495-01