Cisco 12416 Installation And Configuration Manual page 266

Troubleshooting the Switch Fabric
To Fabric FIA Errors
-----------------------
sca not pres 0
grant parity 0
cntrl parity 0
multi fifo
cell parity
LC-Slot2#exit
Disconnecting from slot 2.
Connection Duration: 00:00:21
Router#
After you have gathered the show controllers fia command data from the RPs and
line cards, you can create a table similar to
Table 5-5
Card Slot
0
1
2
3
4
5
6
7
8
Table 5-5
SFC 1. Therefore, the first step to correcting this problem is to check or replace
SFC 1. Whenever a replacement is recommended, first verify that the card is
correctly seated (see the
page
Always reseat the corresponding card as the first line of troubleshooting to be sure
Note
it is correctly seated. If, after reseating the card, the crc errors are still increasing,
then replace the part.
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
5-32
req error
multi req
uni req
0 empty DST req 0
0
Error Data Collection Table
CSC 0 CSC 1
indicates that more than one line card is reporting errors coming from
"Properly Seating Switch Fabric Cards" section on
5-35).
Chapter 5
0 uni fifo overflow 0
0 uni fifo undrflow 0
0 crc32 lkup parity 0
handshake error
Table 5-5.
SFC 0 SFC 1 SFC 2
ERROR
ERROR
ERROR
ERROR
ERROR
Troubleshooting the Installation
0
SFC 3 SFC 4
OL-11495-01