Chapter 3
Installing the Router
Installing the Front Cover of Cisco 12010 Enhanced
Series Routers
Step 1
Step 2
Step 3
OL-11495-01
1
Ball stud
Refer to
Figure 3-27
and use the following procedure to install the front cover for
the Cisco 12010 enhanced series routers.
Align the hinges on each side of the cover with the hinge connectors on each side
of the chassis (see blowout in
Push the front cover until the hinges snap into place.
Repeat Step 1 and Step 2 for the remaining front cover.
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
Installing the Front Cover of Cisco 12010 Enhanced Series Routers
2
Ball stud clip
Figure
3-27).
3-49