Properly Seating Switch Fabric Cards - Cisco 12416 Installation And Configuration Manual

Cisco systems bridge/router installation and configuration guide
Hide thumbs Also See for Cisco 12416:
Table of Contents

Advertisement

Chapter 5
Troubleshooting the Installation
Troubleshooting the Switch Fabric

Properly Seating Switch Fabric Cards

The switch fabric cards in the router can be challenging to insert, and may require
a small amount of force to seat correctly. If either of the CSCs are not seated
properly, you may see the following error message:
%MBUS-0-NOCSC: Must have at least 1 CSC card in slot 16 or 17
%MBUS-0-FABINIT: Failed to initialize switch fabric infrastructure
You may also get this error message if there are only enough CSCs and SFCs
Note
seated for quarter bandwidth configurations. Quarter bandwidth configurations
are no longer supported on Cisco 12000 series routers.
When dealing with switch fabric and line card booting problems, it is important
to verify that all CSCs and SFCs are correctly seated and powered on. The output
from the show version and show controllers fia commands tells you which
hardware configuration is currently running on the box. Important data is
underlined.
Router#show version
Cisco Internetwork Operating System Software
IOS (tm) GS Software (GSR-P-M), Experimental Version
12.0(20010505:112551)
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Mon 14-May-01 19:25 by tmcclure
Image text-base: 0x60010950, data-base: 0x61BE6000
ROM: System Bootstrap, Version 11.2(17)GS2, [htseng 180]
EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
BOOTFLASH: GS Software (GSR-BOOT-M), Version 12.0(15.6)S,
EARLY DEPLOYMENT MAINTENANCE INTERIM SOFTWARE
Router uptime is 17 hours, 53 minutes
System returned to ROM by reload at 23:59:40 MET Mon Jul 2 2001
System restarted at 00:01:30 MET Tue Jul 3 2001
System image file is
"tftp://172.17.247.195/gsr-p-mz.15S2plus-FT-14-May-2001"
cisco 12016/GRP (R5000) processor (revision 0x01) with 262144K bytes
of memory.
R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache
Last reset from power-on
2 Route Processor Cards
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
5-35
OL-11495-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

1281612016

Table of Contents