Cisco 12416 Installation And Configuration Manual page 387

Chapter 7 Maintaining the Router
Position one person in front of the chassis to support and guide it while the second
Step 5
person slowly pushes the chassis to slide it off the rack-mounting table and onto
the scissor-jack platform.
Install the four chassis anchor clips through the slots in the bottom of the chassis:
Step 6
One person should be holding the side of the chassis to prevent it from tipping.
Warning
a.
b.
Figure 7-55 Securing the Chassis to the Scissor-Jack Platform
Front of
chassis
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
OL-11495-01
Align the holes with the bolt holes in the platform.
Insert and tighten the four bolts to prevent the chassis from shifting on the
scissor-jack platform (Figure
Removing and Installing a Chassis
7-55).
7-95