Supplemental Bonding and Grounding Connections
Connecting to the Top Rear Receptacle
Step 1
Step 2
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
3-24
Use the following procedure to connect the supplemental grounding cable to top
rear grounding receptacle.
Attach the grounding cable to the chassis
Insert two M6 bolts through the grounding holes in the chassis.
a.
Place the cable lug over the bolts and secure with the locking washers and
b.
nuts.
Figure 3-14 Router Top Bonding and Grounding Receptacles
Supplemental
Prepare the other end of the grounding wire and connect it to the appropriate
grounding point at your site to ensure an adequate earth ground.
(Figure
bonding and
grounding
receptacle
Chapter 3
Installing the Router
3-14):
OL-11495-01