Cisco 12416 Installation And Configuration Manual page 136

Chapter 3 Installing the Router
Rack-Mounting the Router Chassis
Grasp the handle on the back panel of the chassis to carefully pull the chassis off
Step 3
of the scissor-jack platform and onto the rack-mounting platform while a second
person pushes from the front of the chassis. (See Figure 3-10.)
Figure 3-10 Inserting the Router into the Rack
Do not attempt to lift the chassis with the handles on the back and sides of the
Warning
chassis. These handles are not designed to support the weight of the chassis,
and should be used only to steady and guide the chassis while it is being
inserted into or removed from an equipment rack. To reduce the risk of damage
to the chassis and serious bodily injury, do not use these handles to lift or
support the chassis.
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
3-18
OL-11495-01