System Operation Mode; System Modes; Set The System Operation Mode - RGBlink D Series User Manual

Presentation switcher & seamless scaler

Hide thumbs Also See for D Series:

Table of Contents

Chapter 3: Using Your Product

3.4 System Operation Mode

D2 has five operation modes, which are called SYSTEM MODEs, these include Standard, Dual 2K,

Switcher, Split and MinDelay.

Standard

In standard mode, both output channels output the same signal and resolution.

PIP is available for use.

This is the default mode following a reset.

Dual 2K

Each of the two output channels can have individually have resolution and scale set.

There is no PIP in this mode.

Switcher

Using this mode enables Preview and Program operations, with the DVI (as standard) being the

Program output and HDMI being the Preview output.

Resolution of each output is the same, however, each program/preview can have scale

independently set.

There is no PIP in this mode.

Split

Allows splitting a input signal across both output channels, and also provides setting where the

source is to be split across more than one device.

There is no PIP in this mode.

MinDelay

Is mainly for broadcast applications, for signal conversion with less than 1 frame delay.

There is no PIP in this mode.

Go to the SYSTEM menu select the required SYSTEM MODE.

For all SYSTEM MODES other the SPLIT, the D2 will show "SYSTEM MODE SETTING...", which will

take up to 30secs before the device is ready.

Single Image Switching

D2 can realize seamless effects switching between two channels.

User Manual

Table of Contents