Table of Contents
Advertisement
3.3 Using the Menu
Use the menu system for convenient and intuitive operation. D2 OLED display shows the menu
items. The OLED display will show the default state when the menu is not in use, or the
operation has timed out. Using the MENU button and rotary knob in the front panel, the OLED
display will show the corresponding menus according to user selections.
3.3.1 Understanding the Display
Turn the power switch to the ON position, the OLED display will show the start-up interface and
show the default menu after completing initialization as below:
Introduce for the above information:
Input Signal
1
Shows the current Input signal that is selected. The related dedicated signal button
will be lit red.
Input Resolution
Show the current input resolution from the selected Input source. To configure input
2
resolutions, use the EDID Management features. A wide range of input resolutions are
supported depending the input – refer to Specification.
If a # symbol is show after the resolution, then a custom resolution is being used.
Serial Number
Shows the serial of the product.
3
When not displayed here, the serial number can be found via the TECH SUPPORT
menu.
Genlock
4
Displays to whether a Genlock signal is currently being provided (input). Config from
the OUTPUT menu.
System Mode
5
Indicates the current SYSTEM MODE. SYSTEM MODE is set from the SYSTEM
menu.
Ethernet
6
D2
User Manual
Chapter 3: Using Your Product
17
Advertisement
Table of Contents
