RGBlink D Series User Manual page 39

Sending Card
->Receiving Card
->Choose Cable
Horizontal Card
Vertical Card
Width
e. Turn the rotary knob, and select <Port Offset Y>, push the rotary knob to confirm. Turn the
rotary knob, Set Port Offset Y as 240 (Note: Port Offset Y = Vertical × Height, before we set
vertical card as 2 and height as 120). Shown as follows:
Height
Port Offset X
->Port Offset Y
Connect Type
f. Turn the rotary knob, and select <Connect Type>, shown as follows:
Height
Port Offset X
Port Offset Y
->Connect Type
Select the connection mode, the setting is same with Port U. Then connection of both the
Port D and Port U of One Sending Card to LED Screen is finished.
Rendering is as follows:
D2 User Manual
Chapter 3: Using Your Product
>>
>>
Port D
3
2
120
120
0
240
>>
120
0
240
>>
38