Table of Contents
Advertisement
6.1.10 Software Upgrade Failed
Frequently Asked
Software Upgrade Failed
Question
Processing Bar Stops at About 90%
If processing bar stops at about 90% during _xx_Packge_xx.bin, please use
_xx_MCU_xx.bin. After that, no need to upgrade _xx_Packge_xx.bin. (Please
disconnect the input and output before upgrade).
Troubleshooting
Processing Bar Stops at About 30%
If processing bar stops at about 30% during _xx_Packge_xx.bin, please use
_xx_MCU_xx.bin. After upgrade _xx_MCU_xx.bin, re-upgrade
_xx_Packge_xx.bin. (Please disconnect the input and output before upgrade).
D2
User Manual
66
Advertisement
Table of Contents
