Table of Contents
Advertisement
segment, open up windows control software and user can directly control on D2.
If router's default network segment is 192.168.1.1, then user need to change router's default
gateway or change processor's IP, both methods are available, but we suggest to change
processor's IP.
Method one: Change processor's IP.
Push the [MENU] button on front panel and go into items as below picture shows. Change
processor's IP to be 192.168.1.100, confirm and restart the processor, then user can control on
D2 via windows control software.
Method two: Change router's gateway.
Type in 192.168.1.1 on the browser and go into router setting.
Type in default account and code (please refer to the router user manual for the information).
Go to router setting part and find out "LAN port setting", change the default value "192.168.1.1"
to be "192.168.0.1".
Save the setting and restart the router, then user can control on D2 via windows control software.
D2
Chapter 4: Controlling Your Processor Remotely
User Manual
58
Advertisement
Table of Contents
