RGBlink D Series User Manual page 38

a. Turn the rotary knob, and select <Display Setup>:
Transition
System
Logo
->Display Setup
b. Push the rotary knob to confirm, turn the rotary knob, select <Card Type> in <Quick
Connection> option, push the rotary knob to confirm, turn the rotary knob, select the
sending card type, for example, select Linsn (D2 supports Linsn and Colorlight sender card,
for Nova sender card, it only support brightness and Gamma adjustment). Shown as
follows:
->Quick Connection
Senior
*Card Type
Brightness
Output Format
Quick Connection
c. After setting, turn the rotary knob, select <Quick Connection>, push the rotary knob to
confirm for next setting, shown as follows:
Card Type
Brightness
Output Format
->Quick Connection
->Sending Card
Receiving Card
d. Turn the rotary knob, select <Receiving Card>, push the rotary knob to confirm. Turn the
rotary knob again, and select <Choose Cable>, push the rotary knob to confirm. Turn the
rotary knob, select Port D and push the rotary knob to confirm.
D2 User Manual
Chapter 3: Using Your Product
>>
>>
>>
>>
>>
>>
Linsn
>>
>>
>>
Linsn
>>
>>
>>
>>
>>
37