Table of Contents
Advertisement
Dimmer and Effects Setting
1. Push the [DIMMER] button, and enter to the menu items, which include dimmer and effects.
2. Dimmer setting: The adjustment range is 0~100.
3. Effects setting: The setting for effects include brightness, contrast, chroma, hue, color
temperature, color correction, gamma, brightness, H sharpness, V sharpness, noise reduction,
Invert, Flip V, Flip H and Flip 90 Degree.
Split Setting
In split mode, user can set split parameters of single or multiple devices quickly. The split
operations are as follows:
Project: There is one LED display, the size is 3864x1152, divide into right and left halves, the left
width is 1824 and the right width is 2040, we will cascade the two LED displays with one D2, and
display a complete picture in the whole screen.
(1) Connect the interface
Connect the DVI signal to the DVI input interface, connect the DVI output to the left LED
sending card, and connect the HDMI output to the right LED sending card.
(2) Select the system mode
Push the [MENU] button to enter to the menu items, turn the rotary knob to select <System>:
D2
Note
In PIP mode, user need to select the image that to set
in <Layer Select> option before setting.
Note
User can also select <Effects> in <Output> option by
pushing the [MENU] button for setting.
Note
In Dual 2K mode, User need to select the channel in
<Channel Select> before setting.
For example, choose the signal of CHB:
1. Push the [MENU] button to enter to menu items.
2. Select <Output>, push the rotary knob to confirm.
3. Turn the rotary knob, and select <Channel select>.
4. Turn the rotary knob and select CHB.
Select the signal, and CHB will switch to the
5.
selected signal.
Note
In Switcher mode, all the settings above are for
preview.
User Manual
Chapter 3: Using Your Product
29
Advertisement
Table of Contents
