Table of Contents
Advertisement
Chapter 7
7.1 Specification
Genlock Input (Standard)
Number of Inputs
Connector
Supported Standards
3G-SDI Input (Standard)
Number of Inputs
Connector
Data Rate
Supported Standard
Supported Resolution
Balance
VGA DB15 Input (Standard)
Number of Inputs
Connector
Supported Standard
Signal Level
Supported Resolution
DVI Input (Standard)
Number of Inputs
Connector
Supported Resolution
D2
Appendix
1
Standard BNC Socket
480i I 576i I 1080i59.94 I 1080i50 I 720p50 I 720p59.94 I 1080p50 I
1080p59.94 I 1080p60 I 1080psf23.98 I 1080psf24
2
BNC
2.97Gb/s, 2.97/1.001Gb/s, 1.485Gb/s, 1.485/1.001Gb/s and 270Mb/s
SMPTE 425M - 3G Level A and Level B Formats
SMPTE 425M (3G Level A) 4:2:2： 1920×1080/60 (1:1) I 1920×1080/50
(1:1).
SMPTE 425M (3G Level B DS1 and DS2) 4:2:2：1920×1080/60 (2:1) I
1920×1080/50 (2:1)
SMPTE 274M (HD) ： 1920×1080I/60 (2:1) or 1920×1080/30 (PsF) I
1920×1080I/50 (2:1) or 1920×1080/25 (PsF) I
1920×1080/25 (1:1) I 1920×1080/24 (1:1) I 1920×1080/24 (PsF)
SMPTE 125M (SD)：1440×487/60 (2:1)
SMPTE ITU-R BT.656 (SD)：1440×576/50 (2:1) Or dual link
progressive, 625-line generic.
Belden 1694A cable:
150m at 2.97Gb/s
250m at 1.485Gb/s
480m at 270Mb/s
1
Standard DB15 Socket
VGA-UXGA
R, G, B, Hsync, Vsync: 0 to1Vpp±3dB (0.7V Video+0.3v Sync ) 75
ohm
black level: 300mV Sync-tip: 0V
VGA-UXGA (800×600@60 I 1024×768@60 I 1280×1024@60 I
1440×900@60 I 1600×1200@60)
1
Standard DVI-D socket
SMPTE: 625/25/50 PAL, 525/29.97/59.94 NTSC,
1080P50/59.94/60 I 1080i50/59.94/60,
User Manual
1920×1080/30 (1:1) I
68
Advertisement
Table of Contents
