Chapter 5 Xpose Mini Operation; Connect Mini And Computer - RGBlink mini User Manual

Chapter 5 XPOSE mini Operation

XPOSE mini is a software that allows you to control your mini, RGBlink is available for all platforms including
Android, iOS, MacOS, Windows.
You can either connect the mini directly to your computer via the LAN port provided by the mini, or link the mini
to your router and the computer to the Wi-Fi emitted by your wireless router.
Note:The IP address of the mini must be in the same WLAN segment as the computer or the mobile control
device you choose.

5.1 Connect mini and computer

5.1.1 Direct Link via a Network Cable
(1)Modify mini's IP Address
The mini is connected to a computer via TCP/IP protocol for data transfer. Therefore, you need to keep the mini on
the same IP network segment as your PC or mobile device. If the mini is connected directly to a computer, you
need to change the mini's IP manually to avoid IP conflicts on the same network segment.
Steps to modify mini's IP address:
1.Push「M」button
2.Enter IP setting sub-menu
3.Push「Y」knob to enter the setting,rotate「Y」
knob to change value.Press the 「Y」knob one
after another to confirm
(2) Change the PC's IP Address
To ensure that the mini and the PC can communicate smoothly, the IP address of the computer needs to be
verified.
Steps to modify the IP address of the Ethernet port (windows).
mini User Manual
29