Set The Led Display Connection - RGBlink D Series User Manual

3.6 Set the LED Display Connection

D2 can realize two connection as follows connecting the Port D or Port U of one sending card to
LED screen and connecting the both Port D and Port U of one sending card to LED screen (PORT A
or PORT B is for Colorlight, and PORT D or PORT U is for Linsn). The following are the detailed
operation steps of the two connections.
1. Connect the Port D or Port U of One Sending Card to LED Screen
(1) First, make sure that the device is in normal operation.
(2) Select the input source, for example, DVI.
(3) Connect the cable to Port U.
(4) Turn the rotary knob, and select <Display Setup>:
(5) Push the rotary knob to confirm, turn the rotary knob, select <Card Type> in <Quick
Connection> option, push the rotary knob to confirm, turn the rotary knob, select the sending
card type, for example, select Linsn (D2 supports Linsn and Colorlight sender card, for Nova
sender card, it only support brightness and Gamma adjustment). Shown as follows:
(6) After setting, turn the rotary knob, select <Quick Connection>, push the rotary knob to
confirm for next setting, shown as follows:
D2
Transition
System
Logo
->Display Setup
->Quick Connection
Senior
*Card Type
Brightness
Output Format
Quick Connection
Card Type
Brightness
Output Format
->Quick Connection
User Manual
Chapter 3: Using Your Product
>>
>>
>>
>>
>>
>>
Linsn
>>
>>
>>
Linsn
>>
>>
>>
34