Table of Contents
Advertisement
Push the rotary knob to confirm. Turn the knob to select <Output Format>, and set the
output formats as 2048x1152@60Hz.
The resolutions of the two outputs will change at the same time.
(5) Set the split parameters
After select the split mode, the OLED screen will show the split parameters, set the H total as
3864, set the V total as 1152, set the first width as 1824, then turn the rotary knob, and select
<Set Parameter>, push the rotary knob to confirm.
(6) Save
Push the [MENU] button to enter to the menu items, turn the rotary knob and select
<Views>.
Push the rotary knob to confirm. Turn the rotary knob again and select <Save>.
Push the rotary knob to confirm. Turn the rotary knob to select the save mode, for example,
select File 4, push the rotary knob to confirm.
D2
Channel Select
->Output Format
CVBS Format
Out Auto Config (N/A)
->H Total
V Total
First Width
Set Parameter
Input
Output
Custom Formats
->Views
Recall
->Save
Delete
Delay Recall
Save
->File 4
User Manual
Chapter 3: Using Your Product
CHA
>>
>>
>>
3864
1152
1824
>>
>>
>>
>>
>>
>>
>>
>>
>>
31
Advertisement
Table of Contents
