Using A D2 With Web Option - RGBlink D Series User Manual

Chapter 4: Controlling Your Processor Remotely

4.4 Using a D2 with WEB Option

First, the formation of LAN Remote Control Platform: one Ipad or one Iphone, one router (with
wireless functions, for example with a wireless-enabled VPN router models: Netcore 255 and 266.
Volans VE760W, 982W.), one D2 processor (can be more processors, as long as the network
interface can be connected to the router)
The first step: LAN Physical Connection: connect D2 and routers by CAT5, and connect routers by
CAT5, please use the LAN Ethernet port, WAN port is only used to connect to external networks,
it's not allowed to use in this step.
Connection diagram is as below:
The second step: IP address setup. Please refer to IP Setup steps which in the "Connecting to an
Ethernet Network" section. (Make sure that processors IP address and router IP address are in
the same band.)
When users use Ipad or Iphone, use can use the Safari browser, enter the URL 192.168.0.100
(default) and run. If user using other types of devices will need to install the kernel webkit
browser such as: Apple Safari, Google Chrome or Maxthon browser. The Installing package will
provide Google Chrome browser (windows version).
Note: Internet Explorer, Edge and Firefox are not supported.
The third step: Make connections.
Click icon, run Google Chrome browser, open the page to enter 192.168.0.100 (default) and
run.
59
D2 User Manual