Table of Contents
Advertisement
(7) Turn the rotary knob, select <Receiving Card>, push the rotary knob to confirm. Turn the
rotary knob again, and select <Choose Cable>, push the rotary knob to confirm. Turn the
rotary knob, select Port U and push the rotary knob to confirm.
(8) Set the horizontal card, vertical card, width and height. For example, set horizontal card as 3,
vertical card as 2, width and height as 120, shown as follows:
D2
->Sending Card
Receiving Card
Sending Card
->Receiving Card
->Choose Cable
Horizontal Card
Vertical Card
Width
Choose Cable
->Horizontal Card
Vertical Card
Width
->Height
Port Offset X
Port Offset Y
Connect Type
User Manual
Chapter 3: Using Your Product
>>
>>
>>
>>
Port U
1
1
64
Port U
3
2
120
120
0
0
>>
35
Advertisement
Table of Contents
