Table of Contents
Advertisement
Chapter 4: Controlling Your Processor Remotely
Select the ratio mode of Screen Param A by selecting from scrolling down list, including Full,
Same with Input, 3:2, 4:3, 5:4 and 16:9.
Select the ratio mode of Screen Param A and Screen Param B if choose Dual 2K Mode.
DVI
DVI setting, including output type, color range and Bits.
Output Type: Can select DVI or HDMI, system default DVI output, HDMI signal output will enable
when HDMI option checked.
Color Range: Can select image or video.
Bits: Set the image bits, system default DVI is 8 bits.
HDMI
HDMI setting, including output type, color range and Bits.
Output Type: Can select DVI or HDMI.
Color Range: Can select image or video.
Bits: Set the image bits, system default HDMI is 10 bits, user can select 8 bits or 12 bits.
Genlock
Use can enable or disable the genlock function, and set external and input signal genlock.
Input
Click "Input", and enter to the interface as below:
46
D2
User Manual
Advertisement
Table of Contents
