Table of Contents
Advertisement
2. After the digital, push the rotary knob will add ×, means before × is the horizontal size. Same
operation for vertical size, For example, input 1536 as following:
3. After the digital, push the rotary knob will add ×, means before the × is the vertical size, and
after the × is the refresh rate. Only digital 50 or digital 60 supports for the refresh rate. For
example, input 60 as following. Use the digital buttons to finish the settings.
4. After input all the values, push the rotary knob to enable D2 to output this resolution. D2 will
take 5~10 seconds to enable this output resolution.
D2
Custom Formats
*1536×
Use red number keys and knob
for enter
Custom Formats
*1536×1536×
Use red number keys and knob
for enter
Custom Formats
->1536×1536×60.0
Use red number keys and knob
for enter
User Manual
Chapter 3: Using Your Product
33
Advertisement
Table of Contents
