Signal Level
Format Standard
DP Input (Standard)
Number of Inputs
Connector
Supported Resolution
Supported Bandwidth
Format Standard
HDMI Input (Standard)
Number of Inputs
Connector
Supported Resolution
Embedded Audio
Channels
Format Standard
Genlock Loop Out (Standard)
Number of Loop Out
Connector
Supported Standards
3G-SDI Loop Out (Standard)
Number of Loop Out
Connector
Data Rate
Supported Standard
Supported Resolution
D2
720p50/59.94/60
VESA: 800×600@60 I 1024×768@60 I 1280×768@60 I
1280×1024@60 I 1600×1200@60 I 1920×1080@60
TMDS pwl, single pixel input,165MHz bandwidth
DVI 1.0
1
DisplayPort
Support resolution: WQXGA + (1920 x 1200), and color depth: 30/36
bit (each primary 10/12 bit)
10.8Gb/s
DP1.1
1
HDMI standard type A interface
SMPTE: 625/25/50 PAL, 525/29.97/59.94 NTSC,
1080P50/59.94/60 I 1080i50/59.94/60,
720p50/59.94/60
VESA: 800×600@60 I 1024×768@60 I 1280×768@60 I
1280×1024@60 I 1600×1200@60 I 1920×1080@60
Select one from the two inputs
HDMI 1.3
1
Standard BNC Socket
480i I 576i I 1080i59.94 I 1080i50 I 720p50 I 720p59.94 I 1080p50 I
1080p59.94 I 1080p60 I 1080psf23.98 I 1080psf24
2
BNC
2.97Gb/s, 2.97/1.001Gb/s, 1.485Gb/s, 1.485/1.001Gb/s and 270Mb/s
SMPTE 425M - 3G Level A and Level B Formats
SMPTE 425M (3G Level A) 4:2:2: 1920×1080/60 (1:1) I 1920×1080/50
(1:1).
SMPTE 425M (3G Level B DS1 and DS2) 4:2:2:1920×1080/60 (2:1) I
1920×1080/50 (2:1)
SMPTE 274M (HD) : 1920×1080I/60 (2:1) or 1920×1080/30 (PsF) I
1920×1080I/50 (2:1) or 1920×1080/25 (PsF) I
1920×1080/25 (1:1) I 1920×1080/24 (1:1) I 1920×1080/24 (PsF)
SMPTE 125M (SD):1440×487/60 (2:1)
SMPTE ITU-R BT.656 (SD):1440×576/50 (2:1) Or dual link
progressive, 625-line generic.
User Manual
1920×1080/30 (1:1) I
69