Display Setup Menu; Test Pattern Menu; Tech Support Menu - RGBlink D Series User Manual

Logo Present Display the present logo.

3.3.10 Display Setup Menu

->Quick Connection
Quick Connection Select the card type, set the brightness and output format -- refer to
LED Display
Senior Set the receiving card separately.

3.3.11 Test Pattern Menu

->Type
Select type of Test Pattern to be displayed. Options are:
LOGO
RAMPS
Type
COLOR BARS
GRIDS
GREYS
BLACK
Raster Box Select "ON" or "OFF". If raster box is "ON", the border is shown around
the image, which is for testing.
Diag Motion Enable/Disable Diagonal Motion of the selected test pattern. Select "ON" or
"OFF".
If Raster Box (above) is "ON", size settings in this menu for Box X, Box Y,
Box Width and Box Height are displayed. Select Reset to restore default
AOI Raster Box
settings. AOI raster box will display for all signals except LOGO (Test
Pattern).

3.3.12 Tech Support Menu

->Version
D2
Senior
Connection.
Raster Box
Diag Motion
AOI Raster Box
Video frame captured as in the LOGO (see
for instruction on how to capture LOGO)
H RAMP, V RAMP
100% COL BAR, 75% COL BAR, SMPTE COL BAR
16*16 GRID, 32*32 GRID, BURST
50% GRAY, GRAY STEP1, GRAY STEP2, WHITE,
Serial Number
Email
Website
User Manual
Chapter 3: Using Your Product
>>
>>
Set the
>>
>>
>>
>>
Capture LOGO
>>
>>
>>
>>
25