Using The D2 App For Android & Ios - RGBlink D Series User Manual

Presentation switcher & seamless scaler

Hide thumbs Also See for D Series:

Table of Contents

4.2 Using the D2 App for Android & iOS

1. Download the APP

Go to the App Store on your device, search RGBlink and load the D2 App.

2. APP Control Interface Introduction

WIFI

1. Prepare a router that with wireless internet and DHCP function, connect and set the router by

computer before connect to D2, and enable the IP and DHCP function. (For more details about

setting, please refer to router's instruction).

2. Connect the LAN port of router to the LAN port of D2 with the network cable.

3. Connect to the router by IOS or Android device, system default IP automatic access, use the

web browser to access "192.168.0.100", the default IP address of D2, if the IP address is

changed, please enter the changed IP address. (Set path: MENU->System->Ethernet->IP), user

can wirelessly control D2 after loading.

1) Make sure the device is connected to the router, power on, after the device is stable, turn on

the mobile phone or IPAD APP to search and connect the device, as follows:

2) There are 2 device options after connect the device, DEMO is the presentation template that

comes with software, choose any one of them, as follows:

Chapter 4: Controlling Your Processor Remotely

Network cable

User Manual

Table of Contents