Table of Contents
Advertisement
3.8 Using LOGO Button
Push the [LOGO] button, user can set the test pattern, the settings are as follows:
Type: Select the type of the Test Pattern to be displayed. Options are:
LOGO: Video frame captured as in the LOGO.
RAMPS: H RAMP, V RAMP.
COLOR BARS: 100% COL BAR, 75% COL BAR, SMPTE COL BAR.
GRIDS: 16*16 GRID, 32*32 GRID, BURST.
GRAYS: 50% GRAY, GRAY STEP1, GRAY STEP2, WHITE, BLACK.
Raster Box: Enable or disable the raster box function. If raster box is "ON", the border is shown
around the image, which is for testing.
Diag Motion: Enable or disable Diagonal Motion of the selected test pattern.
AOI Raster Box: If Raster Box (above) is "ON", size settings in this menu for Box X, Box Y, Box
Width and Box Height are displayed. Select Reset to restore default settings. AOI raster box will
display for all signals except LOGO (Test Pattern).
D2
->Type
Raster Box
Diag Motion
AOI Raster Box
User Manual
Chapter 3: Using Your Product
H RAMP
OFF
OFF
>>
40
Advertisement
Table of Contents
