Sealing The Drive Shaft - JLG 1200SJP Service Maintenance Manual

Hide thumbs Also See for 1200SJP:

Table of Contents

SECTION 5 - HYDRAULICS

4. Rotary Group complete: 9 pistons, cylinder subassem-

bly, valve plate, retaining plate, and retaining ball.

5. Swash Plate.

6. Parts of the control valve: control piston, piston rod,

plug, spring stopper max flow, hex nut, and hex head

7. DFR pilot valve.

Sealing the Drive Shaft

BE VERY CAREFUL SO THE DRIVE SHAFT IS NOT DAMAGED DURING THE

REMOVAL OF THE SHAFT SEALING RING.

1. Remove the snap ring.

2. Change the shaft seal and check its' sliding surface

(drive shaft) and housing. Grease the sealing ring.

3. Be careful while you seal the drive shaft. Use an adhesive

tape to prevent the shaft splines from damaging the

– JLG Lift –

Table of Contents