42. Insert the spacer (39) inside the flanged hub (31), paying
attention not to damage the seals already fitted.
43. By using a rubber hammer and a metal stopper push the
spacer (39) against the flanged hub (31), paying atten-
tion not to damage the seals already fitted.
3121142
44. Lube the seal seats into the flanged hub (31) and assem-
ble the O-ring seal (42) and the backup ring (43).
NOTE: The O-ring seals (A) and backup rings (B) must be fitted in
the seats according the mutual position as shown in the
scheme.
– JLG Lift –
SECTION 3 - CHASSIS & TURNTABLE
3-43