JLG 1200SJP Service Maintenance Manual page 88

SECTION 3 - CHASSIS & TURNTABLE
36. By using pliers assemble the circlip (36) into its seat in
the brake shaft (35).
37. Turn the gearbox upside down and assemble the brake
shaft (35) inside the flanged hub (31).
38. Assemble the brake discs package according to the fol-
lowing order: first, insert one sintered bronze disc with
external teeth (33).
3-42
39. Then insert an internally toothed steel disc (32). Repeat
the operation until all 5 sintered bronze discs and 4 steel
discs have been assembled.
40. Fit the internal O-ring seal (41) and the backup ring (40)
into their seats in the spacer (39).
41. Fit the external O-ring seal (38) and the backup ring (37)
into their seats in the spacer (39).
– JLG Lift – 3121142