JLG 1200SJP Service Maintenance Manual page 28

SECTION 1 - SPECIFICATIONS
NOTE: After S/N 0300134389 machines may be built with either
Bonfiglioli or Reggiana Riduttori wheel drive hubs.
4. A. Wheel Drive Hub - Rexroth (Prior to S/N 100128)
Lube Point(s) - Level/Fill Plug
Capacity - 0.5 liters (1/2 full)
Lube - EPGL
Interval - Change after first 150 hours then every
hours of operation
Comments - Place Fill port at 12 o'clock position and
Check port at 3 o'clock position. Pour lubricant into
fill port until it just starts to flow out of check port.
B: Wheel Drive Hub - Bonfiglioli (S/N 100131 to Present)
Lube Point(s) - Level/Fill Plug
Capacity - 2.1 quarts (2 liters) ± 10%
Lube - EPGL
Interval - Change after first 150 hours then every
hours of operation
Comments - Place Fill port at 12 o'clock position and
Check port at 8 o'clock position. Pour lubricant into
fill port until it just starts to flow out of check port.
1-8
C: Wheel Drive Hub - Reggiana Riduttori (S/N 134389 to
Present)
Lube Point(s) - Level/Fill Plug
Capacity - 0.5 quarts (0.5 liters) ± 10%
Lube - EPGL
Interval - Change after first 150 hours then every
hours of operation
1200
Comments - Place Fill port at 12 o'clock position and
Check port at 3 o'clock position. Pour lubricant into
fill port until it just starts to flow out of check port.
5. Hydraulic Return Filter
Lube Point(s) - Replaceable Element
Interval - Change after first 50 hours and every 300 hours
thereafter or as indicated by condition indicator
6. Hydraulic Charge Filter
1200
Lube Point(s) - Replaceable Element
Interval - Change after first 50 hours and every 300 hours
thereafter or as indicated by condition indicator.
– JLG Lift –
1200
3121142