SECTION 6 - JLG CONTROL SYSTEM
13. Hit enter. The number displayed will be the value that
the crack point is set to. The screen will show:
14. Hit Enter. The screen will read:
15. Repeat steps 10 thru 12 for the Lift Down function.
16. After completing all the Tele Calibrations, hit ESC twice
to go back to CALIBRATIONS.
6-62
6.17 CALIBRATING TELESCOPE CRACK POINT
1. Position the Platform/Ground select switch to the Plat-
form position.
2. Plug the analyzer into the connector at the base of the
platform control box.
– JLG Lift –
3121142