Troubleshooting: Platform Can Communications Lost - JLG 1200SJP Service Maintenance Manual

Hide thumbs Also See for 1200SJP:

Table of Contents

SECTION 6 - JLG CONTROL SYSTEM

7. If the CANbus link from the platform module is lost, you

will see the Ground Module SW version, Ground Module

HW version, Ground Module SN, BM SW version, Chassis

SW version, Platform Module SN, but you will not see the

Platform Module SW version or the Platform Module HW

version. The Analyzer screen will read:

Hit the right arrow button once. The screen will read:

TROUBLESHOOTING: PLATFORM CAN COMMUNICATIONS

NOTE: PLATFORM CAN COMMUNICATIONS LOST (6/6) (Help Fault

Code 6-6) basically means all communication linked to the

Platform Module is lost. This does not mean that the Plat-

form Module Link only is affected, this means the commu-

nication link between the Platform Module down to the

Chassis Module has been broken, therefore all Canbus links

have to be checked. Remember this link is wired in parallel,

so the Ground Module has lost all MSA communication.

– JLG Lift –

Chapters

Table of Contents