JLG 1200SJP Service Maintenance Manual page 79

31. By using a puller remove the planet assemblies of the
3rd reduction (20).
32. Remove the spacer (21) from their seats in the pins of
the flanged hub (31).
NOTE: In order to proceed with the gearbox disassembly, it is now
necessary to remove it from the machine and bring it to a
properly equipped workshop.
33. By using a drill remove the caulkings on the ring nut
(22).
3121142
34. By using a tackle place the torque multiplier
(ATZ.09.016.0) on the ring nut (22).
35. By using the torque multiplier (ATZ.09.016.0) loosen the
ring nut (22).
36. Take out the ring nut (22).
– JLG Lift –
SECTION 3 - CHASSIS & TURNTABLE
3-33