JLG 1200SJP Service Maintenance Manual page 73

1. Install the special tool (6689960310) on the flanged hub
(31) and turn the screw until it compresses the springs
(45).
2. Remove the circlip (47) and remove the special tool.
3. Remove the spring retainer disc (46).
3121142
4. Mark the position of the springs (45) as a reference for
the reassembly.
5. Remove the springs (45) from their seats in the brake
piston (44).
6. By using pliers remove the circlip (36) from its seat in the
brake shaft (35).
– JLG Lift –
SECTION 3 - CHASSIS & TURNTABLE
3-27