Motor And Brake Disassembly - JLG 1200SJP Service Maintenance Manual

Motor and Brake Disassembly

1. With unit resting on bench with Motor (10) end up,
loosen Hex Bolts (29) and remove Lift Lugs (28) from the
Motor (10).
2. Pull Motor (10) straight up and remove Motor (10) from
Brake (26).
3121142
10. Hydraulic Motor
26. Hydraulic Brake
27. O-Ring
Figure 3-38. Swing Drive - Motor and Brake Disassembly
– JLG Lift –
SECTION 3 - CHASSIS & TURNTABLE
3. Remove Gasket (31) from between Brake (26) and Motor
(10).
4. Remove Brake (26) from Main Torque-Hub Assembly
and dump oil out of Brake (26).
5. Remove O-ring (27) from between Motor (10) and Brake
(26).
28. Lift Lug
29. Bolt
31. Gasket
3-67