Snap Rings And Screws - JLG 1200SJP Service Maintenance Manual

SECTION 4 - BOOM & PLATFORM
4. Hold the flat bar and remove the screws.
5. Remove the snap rings and pins.
6. Remove the screws from the bar. Remove the snap ring
and pin.
4-56
7. Slide the link out.

Snap Rings and Screws

WHEN PERFORMING MAINTENANCE ON THE POWERTRACK, MAKE SURE TO
DISCARD AND REPLACE ALL OLD SCREWS.
Make sure screws are tight and installed properly.
LOOSE SCREW
– JLG Lift –
TIGHT SCREW
3121142