JLG 1200SJP Service Maintenance Manual page 413

Diagnostics Submenu
Parameter (Displayed on
(Displayed on Analyzer
Analyzer 2
st
1 Line)
BOOM:
U LIFT
SWING
QPRX1
QPRX2
LEVEL
ROT.
U TELE
T TELE
T LIFT
JIB
JIB
JIB INLINE
JIB LIMIT
JIB LIM OVRD
PCV
PUMP POT
CREEP
CRP MODE
3121142
Table 6-5. Machine Diagnostics Parameters
Parameter Value
nd
Line) (Displayed on Analyzer 2
UP/DOWN XXX%
RIGHT/LEFT XXX%
ACTIVE/NOT ACTIVE
ACTIVE/NOT ACTIVE
UP/DOWN XXX%
RIGHT/LEFT XXX%
IN/OUT XXX%
IN/OUT XXX%
UP/DOWN XXX%
UP/DOWN XXX%
RIGHT/LEFT XXX%
OP/CL
OP/CL
OP/CL
ON/OFF
XXX%
ACTIVE/NOT ACTIVE
ACTIVE/NOT ACT
– JLG Lift –
SECTION 6 - JLG CONTROL SYSTEM
nd
Line)
Displays main lift joystick direction & demand
Displays swing joystick direction & demand
Displays status of Q-Prox sensor in lift/swing joystick (Displayed if JOYSTICK
TYPE = 1)
Displays status of Q-Prox sensor in lift/swing joystick (Displayed if JOYSTICK
TYPE = 1)
Displays basket level switch direction & demand. NOTE: demand is controlled
by the pump pot
Displays basket rotate switch direction & demand. NOTE: demand is con-
trolled by the pump pot
Displays main telescope switch direction & demand. NOTE: demand is con-
trolled by the pump pot
Displays tower telescope switch direction & demand. NOTE: demand is con-
trolled by the pump pot
Not displayed if TOWER TELE=NO (machine digit = 0)
Displays tower lift switch direction & demand. NOTE: demand is controlled by
the pump pot
Not displayed if TOWER LIFT=NO (machine digit = 0)
Displays jib lift switch direction & demand. NOTE: demand is controlled by the
pump pot
Not displayed if JIB = NO (machine digit = 0)
Displays jib swing switch direction & demand. NOTE: demand is controlled by
the pump pot
Displayed if JIB = SIDESWING (machine digit = 2)
Displays status of jib inline limit switch. Displayed on models equipped with
the Jib Stow System
Displays status of jib right limit switch. Displayed on models equipped with
the Jib Stow System
Displays status of jib limit override switch. Displayed on models equipped
with the Jib Stow System
Displays status of Platform Control Valve. Displayed on models equipped with
Electronic Platform Leveling.
Displays pump pot demand. Not displayed if MODEL = 601 (machine digit =
4)
Displays pump pot creep switch status
Displays creep mode status
Description
6-37