Swing Drive Lubrication - JLG 1200SJP Service Maintenance Manual

SECTION 3 - CHASSIS & TURNTABLE
8. Tighten the jam nut (shown below) with Loctite #271.
9. Torque the capscrews shown in step 5 to 660 foot-
pounds (896 Nm).
10. Remove shim and discard.

3.18 SWING DRIVE LUBRICATION

1 Brake Bleed Port
2 Brake Fill Port
3 Gearbox Fill Port
4 Gearbox Drain Port
Figure 3-52. Swing Drive Ports
3-98
The Swing Gearbox is to be filled with 79 ounces (2.3 L) of API
Service Classification GL-5 Extreme Pressure Gear Lube. Fill to
cover the ring gear.
1.195 IN. (30.35 mm) TOP OF HOUSING TO TOP
OF RING GEAR. TO BE FILLED TO COVER RING
GEAR.
Figure 3-53. Swing Drive Lubrication
The Swing Brake is to be filled half full, 2.7 ounces (80 ml), with
DTE24 oil.
– JLG Lift – 3121142