Diagnostic Trouble Code Chart - JLG 1200SJP Service Maintenance Manual

Hide thumbs Also See for 1200SJP:
Table of Contents

Advertisement

SECTION 6 - JLG CONTROL SYSTEM
Flash
DTC
Sequence
Code
001
00
1
002
00
2
0010
00
10
000
00
0
0011
00
11
0012
00
12
0013
00
13
0014
00
14
0015
00
15
0016
00
16
0017
00
17
0018
00
18
0019
00
19
0020
00
20
210
21
0
211
21
1
212
21
2
213
21
3
220
22
0
227
22
7
6-82
Table 6-6. Diagnostic Trouble Code Chart
Fault Message
EVERYTHING OK
GROUND MODE OK
RUNNING AT CUTBACK - OUT OF TRANSPORT POSITION
<<< HELP COMMENT >>>
FSW OPEN
RUNNING AT CREEP - CREEP SWITCH OPEN
RUNNING AT CREEP - TILTED AND ABOVE ELEVATION
CHASSIS TILT SENSOR OUT OF RANGE
LOAD SENSOR READING UNDER WEIGHT
ENVELOPE ENCROACHED - HYDRAULICS SUSPENDED
OVER MOMENT - HYDRAULICS SUSPENDED
UNDER MOMENT - HYDRAULICS SUSPENDED
MAIN ENVELOPE ENCROACHED - HYDRAULICS SUSPENDED
TOWER ENVELOPE ENCROACHED - HYDRAULICS SUSPENDED
<<< POWER-UP >>>
POWER CYCLE
KEYSWITCH FAULTY
FSW FAULTY
<<< PLATFORM CONTROLS >>>
STEER SWITCHES FAULTY
Fault Description
The normal help message in
Platform Mode.
The normal help message in
Ground Mode.
Drive speed is limited to "ELE-
VATED MAX" while the vehicle is
out of transport position.
A drive / boom function was
selected with the Footswitch
open.
All functions at creep while the
Creep Switch is open.
All functions at creep while the
Platform is elevated and the
Chassis is tilted.
The Chassis is tilted > 19
degrees for more then 4 sec-
onds.
The Load Sensing System indi-
cates > 20% under calibrated
zero point.
There is an envelope violation.
There is an over moment viola-
tion.
There is an under moment viola-
tion.
There is a main envelope viola-
tion.
There is a tower envelope viola-
tion.
The normal help message is
issued at each power cycle.
Both Platform and Ground
modes are selected simultane-
ously.
Both Footswitches are closed for
more then one second.
Both Steer Left and Steer Right
inputs are closed simultane-
ously.
– JLG Lift –
Check
- Not reported during power-up.
- Not reported during power-up.
- May occur if the Platform is rest-
ing on the ground.
- Envelope control system
equipped vehicle only.
- Envelope control system
equipped vehicle only.
- Envelope control system
equipped vehicle only.
- Main envelope system equipped
vehicle only.
- Tower envelope system
equipped vehicle only.
3121142

Advertisement

Table of Contents
loading

This manual is also suitable for:

1350sjp

Table of Contents