JLG 1200SJP Service Maintenance Manual page 424

SECTION 6 - JLG CONTROL SYSTEM
10. Hit Enter. The screen will read:
11. Hit Enter again. The screen will read:
12. Activate the steer control until the tire and wheel are
straight in relationship with the chassis, then leave off
the control. The display will read FRT LEFT = and show
the numeric calibration value for that wheel.
6-48
13. Hit Enter. The screen will read:
14. Repeat steps 10 thru 12 for left rear steer.
15. Left Rear Steer Calibration will be followed by Right For-
ward Steer Calibration which will be followed by Right
Rear Steer Calibration.
16. After completing all the Steer Calibrations, hit ESC twice
to go back to CALIBRATIONS.
– JLG Lift – 3121142