Manitowoc Grove TMS700E Service And Maintenance Manual page 203

TMS700E SERVICE MANUAL
the gear teeth when the control pedal is pushed down. Verify
all attaching hardware is secure and undamaged. Make
adjustments as needed.
If the swing lock assembly is damaged, install a replacement.
Align the blade of the swing lock assembly so it will fall
between gear teeth. Use the shim and the related attaching
Grove
hardware (two 5/16-18 screws and 5/16 ID lockwashers) to
ensure the swing lock assembly stays in place and can lock
up the superstructure. Tighten the four mounting bolts; refer
to Fasteners and Torque Values, page 1-12 for the torque
value.
Published 01-29-2015, Control # 512-01
SWING SYSTEM
6
6-21